Structural response of stiffened plates in similitude under a turbulent boundary layer excitation

In structural dynamics, similitude laws usually deal with simple configurations as thin flat plates with point forces. Only recently, few papers have analyzed stiffened shells or stochastic pressure loads.This research activity extends the applicability of some similitude laws, developed for thin flat plates under a turbulent boundary layer load, to ribbed plates forced by the same wall pressure fluctuations.The work addresses the problem of designing a scaled experimental test-article and, successively, of re-modulating the measured data in order to get the structural response of an original (unscaled) configuration.Due to the complexity of the structural domain, the design of a scaled configuration leads to a distorted similitude. Then, a simple approach, to circumvent the distortion effects, is proposed.     

强度解调型光纤光栅温度传感实验

光纤光栅在工程上应用广泛,但由于存在解调系统复杂、成本高,尤其是需要使用光纤光谱仪等波长解调仪器,使得光纤光栅很难走入本科教学的实验课堂.本文提出了一种基于窄线宽DFB激光器的强度解调方案,极大地简化了光纤光栅传感器的解调系统,完全满足较高分辨率和实时检测的系统要求.合理安排的温度传感实验可以非常直观地展示光纤光栅的线性传感性能,使得工程化的光纤光栅传感技术轻松走进本科教学课堂,具有极高的推广和应用潜力.     

干式变压器有限元仿真模型的电磁和振动分析

随着电力需求的逐年增长,干式变压器的数量也在不断增加。干式变压器在运行时存在着振动和噪声的问题,为了对干式变压器振动的规律与特点进行研究,本文建立了干式变压器本体振动的有限元仿真模型,通过电磁分析获得相应的磁场分布,然后利用结构动力学分析得到其本体振动的相关规律。通过对处于运行状态的变压器振动数据进行实测分析,得到变压器振动的特征频率,然后对仿真结果进行对比分析,可以发现振动幅度与频率之间存在的关系。本文的研究结果可对干式变压器的减振降噪研究提供参考。     

The production of enantiomerically pure 1-phenylethanol by enzymatic kinetic resolution method using response surface methodology

As the enantiomers of 1-phenylethanol are valuable intermediates in several industries, the lipase catalyzed kinetic resolution of (R,S) -1-phenylethanol is a relevant research topic. In this study, the goal was to determine the optimum reaction parameters to produce enantiomerically pure 1-phenylethanol by lipase (Novozyme 435) catalyzed kinetic resolution using response surface methodology (RSM). Reactions were performed with 40–400 mM (R,S)-1-phenylethanol, 120–1200 mM vinyl acetate and 2–22 mg/mL biocatalyst concentrations (BC _L ), at 20–60 °C and with a stirring rate of 50–400 rpm for 5–120 min. The samples were analyzed using high performance liquid chromatography (HPLC) with a Chiralcel OB column. Optimum reaction parameters to reach 100% enantiomeric excess for the substrate ( ee _s ) were determined as follows: substrate concentration (C _s ): 240 mM, BC _L : 11 mg/mL, at 42 °C with a reaction time of 75 min. Model validation was performed using these conditions and ee _s was calculated as 100%, which indicates the predicted model was efficient and accurate. When compared to the literature, it was observed that the reaction time decreased significantly. This is an important result considering the industrial scale perspective.     

A microfluidics-dispensing-printing strategy for Janus photonic crystal microspheres towards smart patterned displays

From the implementation point of view, the printable magnetic Janus colloidal photonic crystals (CPCs) microspheres are highly desirable. Herein, we developed a dispensing-printing strategy for magnetic Janus CPCs display via a microfluidics-automatic printing system. Monodisperse core/shell colloidal particles and magnetic Fe₃O₄ nanoparticles precursor serve as inks. Based on the equilibrium of three-phase interfacial tensions, Janus structure is successfully formed, followed by UV irradiation and self-assembly of colloid particle to generate magnetic Janus CPCs microspheres. Notably, this method shows distinct superiority with highly uniform Janus CPCs structure, where the TMPTA/Fe₃O₄ hemisphere is in the bottom side while CPCs hemisphere is in the top side. Thus, by using Janus CPCs microspheres with two different structural colors as pixel points, a pattern with red flower and green leaf is achieved. Moreover, 1D linear Janus CPCs pattern encapsulated by hydrogel is also fabricated. Both the color and the shape can be changed under the traction of magnets, showing great potentials in flexible smart displays. We believe this work not only offers a new feasible pathway to construct magnetic Janus CPCs patterns by a dispensing-printable fashion, but also provides new opportunities for flexible and smart displays.     

胆碱氧化酶功能化室温磷光量子点的制备及其对氯化胆碱的定量检测

环境友好型纳米生物传感器能够提高传统生物分子传感器的检测性能，在实际应用中具有重要的应用价值。本研究以胆碱氧化酶（ChOx）为模板，在室温（25 ℃）下通过矿化作用制备了一种ChOx功能化的室温磷光（RTP）量子点（QDs）（ChOx RTP QDs）纳米生物传感器，并利用ChOx与氯化胆碱的特异性酶-底物反应和光诱导的电子转移（PIET）实现了对氯化胆碱（Cho）的RTP定量检测。该纳米生物传感器对氯化胆碱检测的线性范围为0.05~20 mmol/L，检出限为0.02 mmol/L。该方法基于QDs的RTP性质，可以有效地避免生物样品背景荧光的干扰，且无需复杂的样品前处理过程，因此该方法较适合于生物样品中氯化胆碱的定量检测。     

High-temperature fluorescence of low- and high concentration aqueous ATP solution

Abstract

The results of an experimental study of luminescence of an aqueous solution of adenosine triphosphate (ATP) at room temperature are presented. High-temperature fluorescence of low- and high-concentrated solution was experimentally detected and analyzed. The shape of the fluorescence spectrum, the excited state lifetime and the temperature behavior of the emission intensity indicate the formation in the high-concentrated solution of rather stable dimer-like complexes, which can form excimer states.     

NaGd(WO 4)2∶Yb^3+,Ho^3+,Cr^3+微米晶的上转换发光与温度特性

采用水热法制备了NaGd(WO4)2(NGW)∶Yb^3+,Ho^3+,Cr^3+微米晶。研究了Cr^3+离子掺杂浓度对样品的晶体结构、微观形貌、上转换发光及温度传感特性的影响。在980 nm激光激发下,所有样品均发射以546 nm为中心的较弱绿光和以660 nm为中心的强红光,分别对应于Ho^3+离子的5F4,5S2→5I8和5F5→5I8能级跃迁。随Cr^3+离子掺杂量增加,绿光发射峰强度逐渐减弱,而红光发射先增大后减小,在10%时达到最大,样品色坐标逐渐向红色区域偏移。样品的变温光谱表明,NGW∶Yb^3+,Ho^3+,10%Cr^3+微米晶具有很好的温度特性,其测温灵敏度在486 K时达到最大,约为0.0337 K^-1,比NGW∶Yb^3+,Ho^3+的灵敏度提高近1倍。     

Metastable states in high carbon C–(Fe,Ni, Co) films obtained by three-electrode ion-plasma sputtering

Abstract

The effect of ion-plasma deposition on the structure of high-carbon films (at. %) Fe–(20–84) % С, Co–(5–52) % С, Ni–(7–61) % С was investigated. The lattice periods and crystallite sizes of nonequilibrium phases in the as-deposited state and after heating are determined. The temperatures of the beginning and end of the decay of metastable phases during heating at a constant speed are established. The transition from an amorphous to an equilibrium crystalline state in Fe–C films passes through the stage of formation and subsequent decomposition of an intermediate, metastable hcp phase of variable composition. The electrical and hysteretic magnetic properties of the films were measured in the as-deposited state and after heat treatment. The compositions and conditions for producing films with low values of the temperature coefficient of electrical resistance and high coercive force are established. Thus, high-carbon films of Ni–61% C in the as-depoteted state and Fe–69% C films after heating to 900?K are characterized by small TCR values (± 10^?6 К^?1) over a wide temperature range.     

高温、高压、高应变速率动态过程晶体塑性有限元理论模型及其应用

对于高温、高压、高应变速率加载条件下的材料冲击变形行为,动态晶体塑性模型能够直接反映晶体中塑性滑移的各向异性及其对温度、压力和微观组织结构的依赖性,因而广泛应用于材料的动态冲击力学响应、微观结构演化以及动态损伤破坏的模拟。本文综述了高压冲击下动态晶体塑性有限元的理论模型,主要包括变形运动学、包含状态方程的超弹性本构模型和晶体塑性本构模型,涉及位错滑移、相变、孪生等塑性变形机制,以及层裂、绝热剪切带等动态破坏方式。